![]() ![]() Beyond that, some controllers provide extended feedback options like multi-color LEDs. RESET will restore your Key Light factory settings and forget all Wi-Fi credentials.Lightkey sends MIDI feedback messages to any connected controller, enabling it to reflect the current software state through LEDs, motorized knobs or faders, etc. If Key Light does not appear when trying to control or pair via Control Center or phone, the steps in this article can help:Ģ) Push and hold the RESET Button (II) for at least 10 seconds until the light flashes 3x.ģ) Wait a moment before switching on Key Light again. Key Light – What network types are compatible? To find out if your Wi-Fi network is compatible, please see this article: If you are not able to pair Key Light to a network, the network may be incompatible. Elgato Control Center software version 1.0 or later.Elgato Stream Deck software version 4.0 or later.To control Elgato Key Light via Elgato Stream Deck, you will need to download two things: Once Key Light is added to your network, you can control it via any Mac or Windows PC within your network.Ĥ) Launch Control Center and pair Key Light by clicking the + icon.ĥ) Use Control Center to switch on/off, adjust brightness, and fine-tune color temperature. Wi-Fi connection is only needed for initial pairing. It will take approximately 15 seconds to boot up.ģ) If your PC is not equipped with Wi-Fi, use the Elgato Control Center app from the App Store to add and control Key Light from an iOS or Android device. These are the steps you take to use Control Center with your Key Light.ġ) Download and install the Control Center app.Ģ) Switch on your Key Light. ![]() Visit the Downloads page, and select Control Center.įor information on how to pair your Key Light to your Mac, see this article:įor information on how to pair your Key Light to your PC, see this article:įor information on how to pair your Key Light to your Android device, see this article:įor information on how to pair your Key Light to your iOS device, see this article: Key Light is controlled using the Control Center software for macOS, iOS or Windows. After that, it will be connected to your network, even after you turn it off and on again many times. Key Light can be paired to a 2.4 Ghz Wi-Fi network using a macOS, Windows, Android or iOS device that features a Wi-Fi connection.
0 Comments
Leave a Reply. |